Instructions for Teeth Whitening StripsĀ 

Very easy to apply. No need to brush your teeth before whitening, just make sure your teeth are clean.

Open the foil package with dry hands, and try to dry your teeth with a napkin for better results.

Step 1: Fit lower strip – apply gel side against your teeth and fold over the remainder to back of teeth.

Step 2: Fit the upper strip.

Step 3: Dispose the strips after 15 minutes (maximum 30 minutes) and rinse your mouth carefully.

Storing the strips in a cool place will help. Do not freeze the strips and keep them away from direct heat sources.

Instructions for Teeth Whitening Kits

1. Prior to Treatment: Brush and floss just prior to bleaching your teeth. The whitening gel is the most effective with clean teeth. Try the trays in first without any beach to check the fit and comfort. Make sure that the bleaching trays are clean and dry before applying the whitening gel. Moisture reduces the efficiency of the whitening gel and slows down the whitening process

2. Applying the Bleaching Gel: When you apply the gel make sure not to fill the trays. Place a SMALL drop of tooth whitening gel half way up on the inner front surface of tray (in the front of each tooth in the tray). Do not spread the bleach around. Recap the syringe for next treatment until empty. The average treatment per arch requires approximately 0.5ml of whitening gel. We recommend that you only bleach the front 6-8 teeth as no one sees the back teeth.

3. Inserting the Bleaching Trays: Insert whitening tray in the mouth over the teeth. Seat the tray firmly against the teeth. Wipe the excess gel, which seeps over the brim of the tray onto your gums, by holding the tray up with one hand, wipe the excess gel off of the gums with your finger or tissue.

4.a. Wearing Time: We recommend that if you have not whitened before, use for 15 minutes to 30 minutes the first time and increase the wearing time if there is little or no tooth sensitivity.

4.b. Take the mini LED light and open the back. The light has a transparent plastic tab that needs to be removed to allow the batteries to make contact. Once the tab has been removed press the white button to turn the light on. Once the trays are filled with the gel and already in your mouth, place the light in front of your teeth – as close as possible – for as long as the treatment lasts. (Hands-Free Tip: With the holding tabs cut off, and the tray inserted into your mouth, you can hold the mini LED in place with the clear shield between the tray and the inside of your lips.)

5. After Whitening: Remove the tray and rinse off your teeth.


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>